Autodesk® Moldflow® Communicator
Welcome to the Autodesk® Moldflow® Communicator homepage. Autodesk Moldflow Communicator is a CAE results viewer developed specifically for visualizing, quantifying and comparing Autodesk Moldflow Result files (*.mfr).
NEW – Autodesk Moldflow Communicator 2010 is now available for download.
Autodesk Moldflow Communicator 2010 provides new and enhanced functionality
- Autodesk Moldflow Insight 2010 compatibility
- Autodesk Moldflow Adviser 2010 compatibility
- In an effort to improve environmental awareness, Autodesk Moldflow Communicator now displays the material recyclability and indicates the energy requirements of a material.
What our customers are saying:
"I have downloaded Communicator today and have been
playing with it for the last few hours. My first impression?
Fantastic! I believe it will revolutionize the amount of analysis
done. The clients will become more involved with understanding
the capabilities of analysis and the benefits it can derive.
It's a major move forward. I can now send my client a set of
results and offer to talk him through them while we both have
the same results on our screens. You have freed me from days
of report writing."
Graham Webster, Plastic.IT
"I enjoyed working with Communicator. It is a highly
polished and very professional piece of work, like all Moldflow
products. The more I think about it, the more important I
believe this program could be. It could democratise plastics
CAE by opening it up to the majority who have had to be content
up to now with cut-and-dried reports. Now they can be players,
not onlookers. It should expose a new swathe of the market.
At lot of people are going to see that they could do this
for themselves.
I thought the dynamic help was impressive and referred to
it in my article as amounting to a treatise on moulding. So
much so that many people will want to print out much of the
guidance and advice.
I can imagine Communicator as a project management tool where
all the players eventually sign off the proposals to agree
a common way forward. There would be the problem of consolidating
all their ideas in a single control document though."
Clive Maier, Director, Econology Ltd
|
- Visualize Results - Visualize results exported from Moldflow Plastics Insight® (MPI®) and Moldflow Plastics Advisers® (MPA®) to identify problems and validate solutions.
(Larger Image)
- Quantify Results - Quantify analysis inputs
and results against a set of process standards and best practices.
This is achieved through user-specified analysis quality criteria.
(Larger Image)
- Compare Results - Compare results between
two studies to realize design improvement.
(Larger Image)
Whether you are involved in the earliest stages of injection molding
part and mold design or in the part production itself, you can use
the Moldflow Communicator today. |
